Composites for chemical industries
https://doi.org/10.31615/j.corros.prot.2022.103.1-2
Abstract
The issue of using composites based on bis-phenolic and epoxy vinyl ester resins in the practice of anti-corrosion protection of technological equipment, in particular, chemical production equipment, is considered. Composites can be used both as coatings and as structural materials in the manufacture of individual parts of equipment, containers, etc. Composites based on these resins can increase the service life of equipment several times. These materials have a wide temperature range of application; can be operated in aggressive environments (acids, alkalis, oxidizing environments); have high adhesion to metal and concrete; strength comparable to the strength of metals; resistance to shock and dynamic loads and the impact of a liquid stream containing a solid phase
About the Authors
Yu. V. Kholodnikov
SKB «Mysl’», LLC
Russian Federation
Russian Federation
Yury V. Kholodnikov, Ph.D. in Technical Sciences, General
Director
1v, Zhukovsky pi., Yekaterinburg
L. I. Alshits
SKB «Mysl’», LLC
Russian Federation
Russian Federation
Leonid I. Alshits, Ph.D. in Technical Sciences
1v, Zhukovsky pi., Yekaterinburg
A. S. Derbyshev
SKB «Mysl’», LLC
Russian Federation
Russian Federation
Alexander S. Derbyshev, Head of the corrosion monitoring laboratory
1v, Zhukovsky pi., Yekaterinburg
References
1. Vorobieva, G. Ya. (1975). Corrosion resistance of materials in aggressive environments of chemical industries. Moscow: Chemistry.
2. Raskatova, V. M. (Ed.) (1980). Quick reference. Engineering materials. Moscow: Mashinostroenie.
3. Schreyer, L. L. (Ed.) (1981). Reference book. Corrosion. Moscow: Metallurgy.
4. Dollezhal’, N. A. (Ed.) (1954). Reference book. Corrosion and chemical resistance of materials. Moscow: Mashgiz.
5. Kamenev, E. I. etc. (1985). Reference book. The use of plastics. Leningrad: Metallurgy.
6. Kalinchev, E. A., Sokovtseva, M. B. (1987). Reference edition. The choice of plastics for the manufacture and operation of products. Leningrad: Chemistry.
7. Katsnelson, E. L., Balaev, G. A. (1978). Handbook. Plastic masses. Properties and application. Leningrad: Chemistry.
8. Derbyshev, A. S. (2019). Reference book. Development of technical materials and recommendations for the use of non-metals as structural materials and coatings for equipment and pipelines of vacuum evaporators and crystallization plants of SverdNIIKhimmash JSC. Yekaterinburg: SverdNIIKhimmash.
9. Kholodnikov, Yu. V., Alshits, L. I. and others. (2016). Industrial composites. Opportunities and prospects. Saarbrucken: LAP LAMBERT Academic Publishing. GmbH & Co.
10. Kholodnikov, Yu. V., Alshits, L. I. (2013). Reference manual. Lining of technological equipment and building structures with composite materials. Yekaterinburg: Publishing House of the Ural State Mining University.
11. Chemical-resistant polymer composites for the repair of technological pipelines. (2012). GOST R 55073-2012.
12. Chemical-Resistant Polymer Composites for Lining Process Vessels. (2012). GOST R 55074-2012.
Review
For citations:
Kholodnikov Yu.V., Alshits L.I., Derbyshev A.S. Composites for chemical industries. Theory and Practice of Corrosion Protection. 2022;27(1):17-31. (In Russ.) https://doi.org/10.31615/j.corros.prot.2022.103.1-2
Views:
202
Email this article 