New generation anticorrosive materials based on styrene block copolymers
https://doi.org/10.31615/j.corros.prot.2022.103.1-3
Abstract
The modern trends of development in the field of materials for anticorrosive protection are considered. It is shown that one of the promising directions is the development of technology for obtaining gumming coatings from solutions of styrene block copolymers by methods of paint and varnish technology. New materials are described, their main advantages, areas and application experience are considered. The high efficiency of the developed and implemented compositions in the field of anticorr osive protection was noted
About the Authors
Yu. V. SemenovRussian Federation
Yuri V. Semenov, Ph.D. in Technical Sciences, Chief
Technologist
3, Eliseeva str., Volgograd
K. Yu. Zershchikov
Russian Federation
Konstantin Yu. Zershchikov, Ph.D. in Technical Sciences,
General Director
3, Eliseeva str., Volgograd
N. A. Slepokurov
Russian Federation
Nikolay A. Slepokurov, Commertial Director
3, Eliseeva str., Volgograd
References
1. Kudasov, B. K. (1976). Internal stresses in epoxy coatings. Lakokrasochnie materialy i ikh primenenie, (5), 48-49.
2. Bogatkov, L. G., Shpaizman, L. B., Jordansky, A. L., & Zaikov, G. E. (1980). Diffusion of hydrochloric acid into gum rubber. Kauchuk i rezina, (1), 25-27.
3. Elisavetsky, A. M., Elisavestskaya, I. V., & Ratnikov, V. N. (2000). Protection of metals from corrosion by paint coatings. Lakokrasochnie materialy i ikh primenenie, (2-3), 17-22.
4. Products of chemical engineering. Gumming. Typical technological process. (1990). RD 24.023.52-90. Moscow: Mintyazhmash USSR.
Review
For citations:
Semenov Yu.V., Zershchikov K.Yu., Slepokurov N.A. New generation anticorrosive materials based on styrene block copolymers. Theory and Practice of Corrosion Protection. 2022;27(1):33-40. (In Russ.) https://doi.org/10.31615/j.corros.prot.2022.103.1-3